Cisco Copy From Usb To Flash

In the message

Get a USB flash disk drive and format it using the Cisco router. ROUTER#format usbflash0: ROUTER#show usbflash0: 4. Take out the USB flash disk and copy the following files on it. ROMMON upgrade to support booting using USB Flash drive – C1841RM2.srec.123-8r.T9. Cisco IOS image – c1841-ipbase-mz.124-6.T1.bin 5. This is done with the following command: copy usbflash0:c3750e-universalk9-mz.122-58.SE2.bin flash: This will copy the.bin file on the USB into the flash memory of the switch. If you do a 'sh flash:' on the switch, you will see both of them listed in there. Directory of flash:/ 2 -rwx 7728 Jan 16 2014 14:22:00 -06:00 vlan.dat. The three most common commands used for image copying are: copy tftp flash. Copy slot0: slot1: The example below illustrates the procedure to follow for copying the system image from one device to another (for example, from one slot/disk to another slot/disk) on Cisco 3600 series routers.


<e746d9a2-5c00-4270-be67-4fe128012f63@m26g2000yqb.googlegroups.com> BobCopy
Wilson wrote:
| On Nov 19, 4:05�pm, Bob Wilson <roverdro...@gmail.com> wrote:
| > I am trying to put a new IOS image on a 2821 box, and TFTP after many
| > many tries with different PCs is not working. �I have a USB driveCisco copy from usb to flash

| > formatted to FAT that has the image on it, and when I do #sh usbflash0
| > it sees the image and lists the filename correctly. �But when I try

Cisco Copy Flash Tftp


| > #copy usbflash0 flash and a few other things, it tells me the source
| > and destination are the same.
| >
| > I did RTFM as best I could -- I have a library of Cisco books but I
| > did all my Cisco stuff ten years ago when there were no USB ports.
| > One post in this loop says 'copy the image from your USB drive...'
| > but doesn't say how. �So I think it must be possible.

Cisco Usb Flash Drive


| >
| > Thanks in advance for help,
| >
| > Bob Wilson
| > b...@bobwilson.us
|
| PS -- It's not the USB I'm so interested in solving, it's getting the
| image onto the router. If I'm barking up the wrong tree, somebody
| tell me and suggest another way I can get it on there. Thanks again

Copy Cisco Ios From Usb To Flash

Try using ftp.
copy ftp flash